technical data sheet calibration adaptor rpc-3.50 jack C rpc-sp jack 03K110-K21S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface rpc-3.50 according to iec 60169-23 rpc-3.50 mechanically compatible with rpc-2.92 and sma rpc-sp in dependence on mil-std 348 and iec 61169-3 3 rpc-sp mechanically compatible with osp and bma documents application note an001 calibration services material and plating connector parts material plating center conductor cube gold, min. 1.27 m, over nick el outer conductor stainless steel passivated dielectric ps
technical data sheet calibration adaptor rpc-3.50 jack C rpc-sp jack 03K110-K21S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data frequency dc to 22 ghz return loss 3 34 db, dc to 4 ghz 3 26 db, 4 ghz to 22 ghz mechanical data rpc-3.50 rpc-sp mating cycles 3 500 3 1000 maximum torque 1.70 nm recommended torque 0.90 nm engagement force n.a. (no sliding outer conductor) disengagement force n.a. (no sliding outer conduct or) gauge 0.00 mm to 0.08 mm 3.12 mm to 3.22 mm general standard definition for proper operation the vector network analyzer (v na) needs a model describing the electrical behavio ur of this calibration standard. the different models, units, and terms used will depend on the vna type and they will have to be entered into the vna. all values ar e based on typical geometry and plating. offset z o / impedance / z o 50 w offset delay 70.8001 ps length (electrical) / offset length 21.23 mm offset loss 3.60 g ? /s loss 0.0221 db/ ghz environmental data operating temperature range 1 + 20 c to +26 c rated temperature range of use 2 0 c to +50 c storage temperature range - 40 c to +85 c rohs compliant 1 temperature range over which these specification ar e valid. 2 this range is underneath and above the operating te mperature range, within the calibration adaptor is fully functional and could be used without damage.
technical data sheet calibration adaptor rpc-3.50 jack C rpc-sp jack 03K110-K21S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 3 / 3 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg declaration of calibration options factory calibration standard delivery for this calibration standard inc ludes a factory calibration. the calibration certif icate issued reports individual calibration results, traceable to rosenberger standards , national / international standards are not available. model based standard d efinitions are reported in an agilent/keysight, rohde & schwarz and anritsu compatible vna format. accredited calibration not available. for further, more detailed information see applicat ion note an001 on the rosenberger homepage. calibration interval recommendation 12 months recommended accessories - rosenberger test port adaptor - rosenberger rpc-3.50 kalibration-kit 03ck001-150 and 03ck010-150 - rosenberger vna test cable kit and microwave cabl e assemblies for further, more detailed information please visit our homepage www.rosenberger.com . packing standard 1 pce in box weight 9.6 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 19.05.04 markus mller 25.10.16 d 00 16-1390 marion striegler 25.10.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infr inge existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
